Removal

CELLULAR COMMUNICATION: TELEPHONE AND GPS ANTENNA CORDS: REMOVAL

1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

HINT
Refer to the procedure up to Remove Instrument Panel Safety Pad Sub-assembly Removal.

2. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Navigation System)

(a) Remove the screw.





(b) Disengage the 5 clamps and remove the No. 2 antenna cord sub-assembly.

3. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (w/ Navigation System) Disassembly

4. REMOVE NO. 3 HEATER TO REGISTER DUCT (w/ Navigation System) Disassembly

5. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

(a) Remove the 3 screws.





(b) Disengage the 5 clamps to remove the navigation antenna assembly.

6. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedure up to Remove Roof Headlining Assembly Removal.

7. REMOVE ANTENNA CORD SUB-ASSEMBLY

(a) Disconnect each connector.

(b) Remove the 3 bolts and disengage the 18 clamps.

(c) Remove the antenna cord sub-assembly.