Pre-Collision System

PRE-COLLISION: PRE-COLLISION SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.

(e) Check the details of the DTC(s) Pre-Collision System.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.

(e) Clear the DTCs.