Installation

WIPER AND WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION

HINT
* Use the same procedures for both the RH and LH sides.
* The procedures listed below are for the LH side.

1. INSTALL HEADLIGHT CLEANER HOSE

(a) Attach the 5 clamps and install the hose to the front bumper reinforcement.





(b) Connect the hose to the headlight cleaner motor and pump.

2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY





(a) Install the headlight washer actuator to the headlight with the 2 screws.

3. INSTALL HEADLIGHT ASSEMBLY

4. INSTALL FRONT BUMPER COVER Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM INITIALIZATION

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

(a) Perform initialization Repair Instruction - Initialization.