Installation

TIRE AND WHEEL: WHEEL HUB GARNISH: INSTALLATION

1. INSTALL WHEEL HUB GARNISH SUB-ASSEMBLY

(a) Install the wheel hub garnish sub-assembly with the 2 wheel cap retainers.

Torque : 6.0 Nm (60 kgf-cm, 53 in-lbf)

NOTICE:
* Scratches on the wheel hub garnish sub-assembly or wheel may cause abnormal noises during driving.
* When tightening and installing the wheel cap retainers, replace the wheel hub garnish sub-assembly with a new one if the studs on the wheel hub garnish sub-assembly become loose.

2. INSTALL TIRE AND WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)