Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR REAR LH

(a) Install the speed sensor rear with the bolt.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
Prevent foreign matter from attaching to the sensor tip.

(b) Connect the speed sensor connector.

2. INSTALL REAR WHEEL

(a) Install the rear wheel.

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)

3. INSPECT SPEED SENSOR SIGNAL

for 2GR-FSE Test Mode Procedure

for 1UR-FSE Test Mode Procedure