Installation

BRAKE CONTROL: SKID CONTROL BUZZER (w/ Dynamic Radar Cruise Control System): INSTALLATION

1. INSTALL SKID CONTROL BUZZER

(a) Attach the clip and install the skid control buzzer.





(b) Connect the skid control buzzer assembly connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Installation

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Installation

4. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

5. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

6. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Installation

7. INSTALL CONSOLE BOX CARPET Installation

8. INSTALL CONSOLE POCKET Installation

9. INSTALL INSTRUMENT PANEL FINISH END PANEL RH Installation

10. INSTALL INSTRUMENT PANEL FINISH END PANEL LH Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE Installation

12. INSTALL SHIFT LEVER KNOB Installation