Repairs and Inspections Required After A Collision

Repairs and Inspections Required After a Collision


GENERAL PRECAUTION

(a) Perform zero point calibration and sensitivity check if any of the following conditions occur:

- The vehicle is brought to the workshop for repair due to an accident or a collision.

- The occupant detection ECU is replaced.

- Accessories (seatback tray and seat cover, etc.) are installed.

- The front passenger seat is removed from the vehicle.

- The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied.

PRECAUTION FOR DISCONNECTING THE AUXILIARY BATTERY CABLE

NOTICE:
When disconnecting the auxiliary battery negative (-) cable, initialize the following system(s) after the cable is reconnected: