Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

NOTICE:
* When removing front seat assembly RH, perform zero point calibration and sensitivity check Programming and Relearning.
* When replacing the occupant detection ECU, perform zero point calibration and sensitivity check Programming and Relearning.

2. REMOVE FRONT SEAT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Removal.

3. REMOVE OCCUPANT DETECTION ECU

(a) Disconnect the 2 connectors.





(b) Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

Text in Illustration