Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL DCM (TELEMATICS TRANSCEIVER)

2. INSTALL NO. 2 TELEMATICS TRANSCEIVER BRACKET

(a) Install the No. 2 telematics transceiver bracket with the 2 bolts.

3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Install the DCM (telematics transceiver) with bracket with the 3 bolts.

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

11. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL Installation

12. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel) Installation

13. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel) Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

16. INSTALL DECK FLOOR BOX RH Installation

17. INSTALL REAR NO. 3 FLOOR BOARD Installation

18. INSTALL REAR DECK FLOOR BOX Installation

19. INSTALL REAR NO. 2 FLOOR BOARD Installation

20. ADJUST CLOCK

21. DCM ACTIVATION

HINT
When replacing the DCM (telematics transceiver), perform vehicle contract setting DCM Activation.