Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Halogen Headlight): INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Engage the claw.





(c) Install the headlight assembly with the bolt and 2 screws.

Screw (A) - Torque : 1.4 Nm (14 kgf-cm, 12 in-lbf)

Bolt (B) - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT FENDER SIDE PANEL PROTECTOR

(a) Engage the 2 guides and 3 clips to install the front fender side panel protector.

3. INSTALL FRONT BUMPER ASSEMBLY

Installation

4. ADJUST HEADLIGHT AIMING

Headlight Assembly (For Halogen Headlight)