Installation

SUSPENSION: FRONT STABILIZER BAR: INSTALLATION

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. INSTALL FRONT STABILIZER BAR

(a) Install the 2 bushes to the stabilizer bar.

(b) Install the stabilizer bar and 2 stabilizer bar brackets with the 4 bolts.

2. STABILIZE SUSPENSION Installation

3. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

(a) Install the stabilizer link to the lower arm with the nut.

Torque : 113 Nm (1,150 kgf-cm, 83 ft-lbf)

(b) Install the stabilizer link with the bolt and nut.

Torque : 51 Nm (520 kgf-cm, 38 ft-lbf)

4. INSTALL FRONT WHEEL

(a) Install the wheel with the 5 nuts.

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)

5. INSTALL WHEEL HUB ORNAMENT SUB-ASSEMBLY

(a) Install the ornament with the 10 bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)