Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU (w/ Receiver): REMOVAL

1. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE REAR CONSOLE UPPER PANEL GARNISH Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE AIR CONDITIONING CONTROL Removal

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER Removal

7. CONFIRM RADIO RECEIVER ASSEMBLY SHIPMENT MODE SETTING Removal

8. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER





(a) Disconnect the 2 connectors.

(b) Remove the 2 bolts and ECU.