Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

(a) Install the front passenger airbag with the 2 screws.

(b) Install the strap to the bracket.

(c) Install the 2 bolts.

2. REMOVE INSTRUMENT PANEL REINFORCEMENT Reassembly

3. REMOVE NO. 2 HEATER TO REGISTER DUCT Reassembly

4. REMOVE NO. 3 HEATER TO REGISTER DUCT Reassembly

5. REMOVE NO. 1 HEATER TO REGISTER DUCT Reassembly

6. REMOVE FRONT DEFROSTER NOZZLE Reassembly

7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT Reassembly

9. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH Reassembly

10. REMOVE NO. 1 INSTRUMENT PANEL PIN Reassembly

11. REMOVE INSTRUMENT PANEL FINISH PLATE

12. REMOVE STEERING COLUMN ASSEMBLY Installation

13. REMOVE NO. 4 HEATER TO REGISTER DUCT Reassembly

14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR Reassembly

15. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

(a) Install the instrument panel safety pad Installation.

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

17. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

18. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.