Installation

3UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL ROD: INSTALLATION

1. INSTALL ACCELERATOR PEDAL ROD

(a) Install the pedal rod with the 2 bolts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the sensor connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.