Installation

3UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CAMSHAFT POSITION SENSOR

(a) Install the sensor with the bolt and stud bolt.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

2. INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH Installation

3. INSTALL NO. 1 RADIATOR HOSE

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

6. ADD ENGINE COOLANT Service and Repair

7. CHECK FOR ENGINE COOLANT LEAKS

(a) Check for engine coolant leaks Testing and Inspection.

8. INSTALL NO. 1 AIR CLEANER INLET Installation

9. INSTALL V-BANK COVER Installation