Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL TURN SIGNAL SWITCH ASSEMBLY





(a) Install the switch with the 2 screws.

(b) Connect the connector.

2. INSTALL STEERING COLUMN COVER LOWER

3. INSTALL STEERING COLUMN COVER UPPER

4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.