Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR FLOOR FINISH PLATE Disassembly

3. REMOVE SPARE WHEEL COVER ASSEMBLY

4. REMOVE SPARE TIRE

5. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

6. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Disassembly

7. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Disassembly

8. REMOVE TOOL BOX COVER Disassembly

9. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly

10. REMOVE LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Disassembly

11. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY RH Disassembly

12. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY LH Disassembly

13. REMOVE TONNEAU COVER ASSEMBLY Disassembly

14. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly

15. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Disassembly

16. REMOVE REAR FLOOR FINISH SIDE PLATE RH Disassembly

17. REMOVE REAR FLOOR FINISH SIDE PLATE LH Disassembly

18. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Disassembly

19. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Disassembly

20. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Disassembly

21. REMOVE REAR BUMPER COVER Removal

22. REMOVE LICENSE PLATE LIGHT ASSEMBLY





(a) Detach the claw and remove the license plate light.