Installation

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY





(a) Attach the claw to install the license plate light.

2. INSTALL REAR BUMPER COVER Installation

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Reassembly

4. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Reassembly

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT Reassembly

6. INSTALL REAR FLOOR FINISH SIDE PLATE LH Reassembly

7. INSTALL REAR FLOOR FINISH SIDE PLATE RH Reassembly

8. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Reassembly

9. INSTALL TONNEAU COVER ASSEMBLY Reassembly

10. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY RH Reassembly

11. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH Reassembly

12. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Reassembly

13. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY Reassembly

14. INSTALL TOOL BOX COVER Reassembly

15. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Reassembly

16. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Reassembly

17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

18. INSTALL SPARE TIRE

19. INSTALL SPARE WHEEL COVER ASSEMBLY

20. INSTALL REAR FLOOR FINISH PLATE Reassembly

21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

22. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.