Removal

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY





(a) Using a screwdriver, detach the 4 clips and remove the panel.

HINT
Tape the screwdriver tip before use.

(b) Disconnect the connector.

3. REMOVE STEERING COLUMN COVER LOWER Removal

4. REMOVE STEERING COLUMN COVER UPPER

5. REMOVE TURN SIGNAL SWITCH ASSEMBLY Removal

6. REMOVE COMBINATION METER ASSEMBLY





(a) Remove the 4 screws.

(b) Disconnect the connectors and remove the combination meter.