Reassembly

AIR CONDITIONING: CONDENSER: REASSEMBLY

1. INSTALL COOLER DRYER

(a) Using needle nose pliers, install the cooler dryer.





(b) Install 2 new O-rings to the cap.

(c) Sufficiently apply compressor oil to the contact surfaces of the O-ring and the cap.

Compressor oil:

ND-OIL 8 or equivalent

(d) Using a 10 mm hexagon wrench, install the cap to the condenser.

Torque : 12.3 Nm (125 kgf-cm, 9 ft-lbf)