Removal

SEAT: FRONT SEAT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
CAUTION:
Wear protective gloves. Sharp areas on the seatback spring, seat adjuster and seat cushion spring may injure your hands.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT SEAT ASSEMBLY

(a) Using a screwdriver, pry out the 4 seat track bracket covers.

HINT
Tape the screwdriver tip before use.

(b) Remove the 4 bolts.

(c) Disconnect the connectors under the seat. Then remove the seat.

NOTICE:
Be careful not to damage the vehicle body.