Installation

SEAT: FRONT SEAT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY

(a) Place the seat in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Connect the connector under the seat.

(c) Install the seat with the 4 bolts.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(d) Install the 4 seat track covers.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

4. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.