Reading and Clearing Diagnostic Trouble Codes

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream (with CAN VIM) to the DLC3.

(b) Turn the ignition switch ON.

(c) Read the DTC by following the prompts on the Techstream screen.

HINT
Refer to the Techstream operator's manual for further details.

2. CLEAR DTC

(a) Connect the Techstream (with CAN VIM) to the DLC3.

(b) Turn the ignition switch ON.

(c) Erase the DTC by following the directions on the Techstream screen.

HINT
Refer to the Techstream operator's manual for further details.