Removal

NAVIGATION: NAVIGATION ECU (for HDD): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR FLOOR FINISH PLATE Removal

3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

4. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Removal

5. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Removal

6. REMOVE SPARE WHEEL COVER ASSEMBLY

7. REMOVE LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Removal

8. REMOVE TOOL BOX COVER Removal

9. REMOVE TONNEAU COVER ASSEMBLY Removal

10. REMOVE LUGGAGE COMPARTMENT TRIM INNER LOWER COVER

11. REMOVE LUGGAGE COMPARTMENT TRIM FRONT COVER Removal

12. REMOVE LUGGAGE COMPARTMENT TRAY FRONT BRACKET

(a) Remove the 4 bolts, 2 nuts and 2 brackets.

13. REMOVE MULTI-MEDIA MODULE DISPLAY ASSEMBLY





(a) Remove the 2 bolts and 2 nuts.

(b) Disconnect the connectors and remove the ECU.