Installation

NAVIGATION: NAVIGATION ECU (for HDD): INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Specified Torque For Standard Bolts.

1. INSTALL MULTI-MEDIA MODULE DISPLAY ASSEMBLY

(a) Connect the connectors.

(b) Install the ECU with the 2 bolts and 2 nuts.

2. INSTALL LUGGAGE COMPARTMENT TRAY FRONT BRACKET

(a) Install the 2 brackets with the 4 bolts and 2 nuts.

3. INSTALL LUGGAGE COMPARTMENT TRIM FRONT COVER Installation

4. INSTALL LUGGAGE COMPARTMENT TRIM INNER LOWER COVER

5. INSTALL TONNEAU COVER ASSEMBLY Installation

6. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Installation

7. INSTALL TOOL BOX COVER Installation

8. INSTALL SPARE WHEEL COVER ASSEMBLY

9. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH Installation

10. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Installation

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

12. INSTALL REAR FLOOR FINISH PLATE Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.