Removal

AUDIO / VISUAL: RADIO ANTENNA HOLDER: REMOVAL

1. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY RH Removal

3. REMOVE REAR FLOOR FINISH PLATE Removal

4. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

5. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Removal

6. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Removal

7. REMOVE SPARE WHEEL COVER ASSEMBLY

8. REMOVE TOOL BOX COVER Removal

9. REMOVE LUGGAGE COMPARTMENT TRIM COVER SUB-ASSEMBLY REAR Removal

10. REMOVE TONNEAU COVER ASSEMBLY Removal

11. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Removal

12. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Removal

13. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Removal

14. REMOVE WITH HOLDER ANTENNA ASSEMBLY





(a) Remove the nut and antenna ornament.





(b) Disconnect the connector and cord plug from the antenna.

(c) Remove the nut and antenna.