B2793

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2793: Transponder Chip Malfunction
B2793 - Transponder Chip Malfunction

DESCRIPTION

This DTC is output when: 1) during key code registration, a key malfunction occurs; or 2) the key code was unable to be registered properly.





INSEPCTION PROCEDURE

PROCEDURE

1. REREGISTER KEY

(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.

(b) Reregister the key (which caused this DTC to be output) with the transponder key ECU Programming and Relearning.

(c) Insert the same key into the ignition key cylinder.

(d) Check that the engine starts with the key.

OK:

Engine starts.

NG -- REPLACE KEY

OK -- END