Installation

PRE-COLLISION: DRIVER MONITOR ECU: INSTALLATION

1. INSTALL DRIVER MONITOR ECU





(a) Install the ECU with the 2 nuts.

(b) Connect the connectors.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation

6. INSTALL INSTRUMENT SIDE PANEL LH Installation

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.