Installation

1UR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

1. INSTALL ACCELERATOR PEDAL





NOTICE:
* Avoid physical shocks to the accelerator pedal.
* Do not disassemble the accelerator pedal assembly.
(a) Connect the tip of the accelerator pedal rod to the bracket.

(b) Install the accelerator pedal with the 3nuts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the accelerator pedal sensor connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

4. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.