Removal

LIGHTING: HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.
2. REMOVE FRONT BUMPER COVER

(a) Remove the front bumper cover Removal.

3. REMOVE HEADLIGHT ASSEMBLY LH





(a) Remove the 3 bolts and remove the headlight.

(b) Disconnect the connector.