Removal

AUDIO / VISUAL: HARD DISK DRIVE: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.
3. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY

(a) Remove the display and navigation module display Removal.

4. REMOVE HARD DISC

(a) Remove the 3 screws.





(b) Remove the hard disc in the direction of the arrow shown in the illustration.