Connecting Rod, Engine

Connecting rod thrust clearance
Standard 0.15 to 0.40 mm (0.00591 to 0.0157 in.)
Maximum 0.50 mm (0.0197 in.)

Connecting rod oil clearance
Standard 0.045 to 0.067 mm (0.00177 to 0.00264 in.)
Maximum 0.070 mm (0.00276 in.)

Connecting rod diameter
Mark1 56.000 to 56.006 mm (2.2047 to 2.2050 in.)
Mark2 56.007 to 56.012 mm (2.2050 to 2.2052 in.)
Mark3 56.013 to 56.018 mm (2.2052 to 2.2054 in.)
Mark4 56.019 to 56.024 mm (2.2055 to 2.2057 in.)

Connecting rod cap
1st 40 Nm (408 kgf-cm, 30 ft lb)
2nd Turn 90°