Installation

SEAT: FRONT SEATBACK HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

(a) Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 8 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT RH Reassembly

4. INSTALL FRONT SEAT HEADREST SUPPORT LH Reassembly

5. INSTALL FRONT SEATBACK BOARD COVER SUB-ASSEMBLY Reassembly

6. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY Reassembly

7. INSTALL RECLINING REMOTE CONTROL BEZEL Reassembly

8. INSTALL RECLINING REMOTE CONTROL LEVER KNOB Reassembly

9. INSTALL SHOULDER BELT ANCHOR COVER Reassembly

10. INSTALL FRONT SHOULDER BELT HANGER CAP Reassembly

11. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

12. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

13. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

14. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

15. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

16. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

17. INSTALL FRONT SEAT ASSEMBLY Installation

18. INSTALL REAR INNER SEAT TRACK BRACKET COVER Installation

19. INSTALL REAR OUTER SEAT TRACK BRACKET COVER Installation

20. INSTALL FRONT INNER SEAT TRACK BRACKET COVER Installation

21. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER Installation

22. INSTALL FRONT SEAT HEADREST ASSEMBLY

23. INSPECT SRS WARNING LIGHT

HINT
Inspect the SRS warning light Diagnosis System.

24. INSPECT FRONT SEAT ASSEMBLY Installation