Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 14 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
(b) Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD Reassembly

3. INSTALL FRONT POWER SEAT SWITCH (W/O Memory) Reassembly

4. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (W/ Memory) Reassembly

5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

6. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

7. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

9. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

10. INSTALL FRONT SEAT ASSEMBLY Installation

11. INSTALL REAR INNER SEAT TRACK BRACKET COVER Installation

12. INSTALL REAR OUTER SEAT TRACK BRACKET COVER Installation

13. INSTALL FRONT INNER SEAT TRACK BRACKET COVER Installation

14. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER Installation

15. INSTALL FRONT SEAT HEADREST ASSEMBLY

16. INSPECT SRS WARNING LIGHT

HINT
Inspect the SRS warning light Diagnosis System.

17. INSPECT FRONT SEAT ASSEMBLY Installation