Removal

2GR-FSE STARTING: ENGINE SWITCH: REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

2. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

4. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY Removal

6. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

7. REMOVE CONSOLE BOX Removal

8. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal

10. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal

11. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Removal

12. REMOVE ENGINE SWITCH

(a) Disconnect the switch connector.





(b) Detach the 2 claws and remove the switch.