Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ANTENNA (for Rear Side): REMOVAL

1. PRECAUTION (W/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE REAR WHEEL LH

4. REMOVE REAR NO. 2 FLOOR HOUSING SHIELD

5. REMOVE REAR FENDER LINER LH

6. REMOVE REAR TIRE PRESSURE ANTENNA LH

(a) Disconnect the connector.





(b) Remove the 2 nuts and the rear tire pressure antenna LH.