Installation

DOOR LOCK: DOOR CONTROL RECEIVER (for Luggage Compartment): INSTALLATION

1. INSTALL NO. 2 DOOR CONTROL RECEIVER

(a) Engage the guide.





(b) Install the No. 2 door control receiver with the bolt.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(c) Connect the connector.





2. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH Installation

3. INSTALL ROPE HOOK ASSEMBLY Installation

4. INSTALL ROPE HOOK Installation

5. INSTALL LUGGAGE COMPARTMENT DOOR SIDE CUSHION RH

HINT
Use the same procedure for the RH side and LH side Installation.

6. INSTALL PACKAGE TRAY TRIM SIDE COVER RH

7. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

8. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR CUSHION

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL LOWER INNER LUGGAGE COMPARTMENT TRIM COVER Installation

10. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER Installation

11. INSTALL ROPE HOOK ASSEMBLY Installation

12. INSTALL LUGGAGE DOOR LOCK PROTECTOR Installation

13. INSTALL DECK SIDE TRIM BOX LH Installation

14. INSTALL DECK SIDE TRIM BOX RH Installation

15. INSTALL SPARE WHEEL COVER TRAY ASSEMBLY (W/O Spare Tire) Installation

16. INSTALL SPARE TIRE (W/ Spare Tire)

17. INSTALL SPARE WHEEL CUSHION (W/ Spare Tire) Installation

18. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (W/O Spare Tire) Installation

19. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (W/ Spare Tire) Installation

20. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation

21. INSTALL SLIDING ROOF GUIDE RAIL STOPPER Installation

22. INSTALL TONNEAU COVER HOOK HOLDER Installation

23. INSTALL TONNEAU COVER ASSEMBLY Installation

24. SET LUGGAGE COMPARTMENT DOOR Installation

25. CLOSE METAL TOP ROOF Installation

26. INSPECT RETRACTABLE HARDTOP SYSTEM

Operation Check