Connecting Rod: Specifications

Connecting rod thrust clearance
Standard 0.25 to 0.40 mm (0.00984 to 0.0157 in.)
Maximum 0.50 mm (0.0197 in.)

Connecting rod oil clearance
Standard 0.042 to 0.068 mm (0.00165 to 0.00268 in.)
Maximum 0.070 mm (0.00276 in.)

Connecting rod diameter
Mark1 51.000 to 51.006 mm (2.00787 to 2.00811 in.)
Mark2 51.007 to 51.012 mm (2.00815 to 2.00834 in.)
Mark3 51.013 to 51.018 mm (2.00838 to 2.00858 in)
Mark4 51.019 to 51.024 mm (2.00862 to 2.00881 in.)

Connecting rod cap
1st 25 Nm (255 kgf-cm, 18 ft lb)
2nd Turn 90°