Installation

SLIDING ROOF / CONVERTIBLE: REMOVABLE ROOF AUXILIARY CATCH: INSTALLATION

1. INSTALL REMOVABLE ROOF AUXILIARY CATCH ASSEMBLY LH

(a) Using a T30 "TORX" socket wrench, install the removable roof auxiliary catch assembly LH with the 3 screws.

Torque : 22 Nm (224 kgf-cm, 16 ft-lbf)





(b) Engage the clamp.

2. INSTALL REMOVABLE ROOF AUXILIARY CATCH ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

3. TEMPORARILY TIGHTEN ROOF HEADLINING ASSEMBLY Installation

4. INSTALL VISOR HOLDER (for LH Side) Installation

5. INSTALL VISOR HOLDER (for RH Side) Installation

6. INSTALL ROOF HEADLINING ASSEMBLY Installation

7. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER Installation

8. INSTALL RAIN SENSOR (W/ Rain Sensor) Installation

9. INSTALL FRONT ROOF PROTECTOR LH Installation

10. INSTALL FRONT ROOF PROTECTOR RH Installation

11. INSTALL VISOR ASSEMBLY LH Installation

12. INSTALL VISOR BRACKET COVER (for LH Side) Installation

13. INSTALL VISOR ASSEMBLY RH Installation

14. INSTALL VISOR BRACKET COVER (for RH Side) Installation

15. INSTALL MAP LIGHT ASSEMBLY Installation

16. INSTALL FRONT PILLAR GARNISH LH Installation

17. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

18. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation

19. INSTALL FRONT PILLAR GARNISH RH Installation

20. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation

21. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

22. INSPECT RETRACTABLE HARDTOP SYSTEM Installation