Removal

PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear Side): REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY

HINT
Refer to the procedure up to Remove Rear Bumper Assembly Removal.

2. REMOVE NO. 2 ULTRASONIC SENSOR

(a) Disconnect the sensor connector.

(b) Remove the sensor retainer as shown in the illustration.





(c) Remove the No. 2 ultrasonic sensor from the rear bumper.

3. REMOVE NO. 1 ULTRASONIC SENSOR

(a) Disconnect the sensor connector.

(b) Remove the sensor retainer as shown in the illustration.





(c) Remove the No. 1 ultrasonic sensor from the rear bumper.