Connecting Rod: Specifications

Connecting rod cap

1st 25 Nm (250 kgf-cm, 28 ft.-lbf)
2nd Turn 90°

Connecting rod thrust clearance

Standard 0.25 to 0.40 mm (0.0098 to 0.0157 in.)
Maximum 0.50 mm (0.020 in.)

Connecting rod diameter

Mark 1 51.000 to 51.006 mm (2.0079 to 2.0081 in.)
Mark 2 51.007 to 51.012 mm (2.0081 to 2.0083 in.)
Mark 3 51.013 to 51.018 mm (2.0084 to 2.0086 in.)
Mark 4 51.019 to 51.024 mm (2.0086 to 2.0088 in.)