Installation

AA80E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR SP2

(a) Install the speed sensor to the transmission case with the bolt.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the sensor connector.

2. INSTALL SPEED SENSOR NC3

(a) Install the speed sensor to the transmission case with the bolt.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the sensor connector.

3. INSTALL SPEED SENSOR NT

(a) Coat a new O-ring with ATF and install it to the speed sensor.





(b) Using a T30 ''TORX'' wrench, install the speed sensor with the bolt.

Torque : 6.8 Nm (69 kgf-cm, 60 in-lbf)

(c) Connect the sensor connector.

4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation

7. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid AA80E Automatic Transmission.