Installation

SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION

1. INSTALL ABSORBER CONTROL ECU





(a) Install the ECU with the bolt and nut.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf for nut)

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf for bolt)

NOTICE:
* Avoid any impact to the absorber control ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.
(b) Connect the ECU connectors.

(c) Attach the 2 clamps to install the wire harness to the vehicle body.

(d) Return the floor carpet to its original position.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. INSTALL FRONT DOOR SCUFF PLATE RH Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.