Installation

STEERING COLUMN: STEERING CONTROL ECU: INSTALLATION

1. INSTALL STEERING CONTROL ECU

(a) Install the steering control ECU with the 3 screws.





HINT
* Align positioning boss (A) of the blower assembly with the hole of the steering control ECU.
* Securely engage the hook (B) of the steering control ECU with the blower assembly.
(b) Connect the 3 connectors to the steering control ECU.





2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION

HINT
Calibration.