Removal

2GR-FSE FUEL: FUEL PUMP RESISTOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE ENGINE ROOM RH SIDE COVER Removal

4. REMOVE FUEL PUMP RESISTOR





(a) Disconnect the connector and clamp from the fuel pump resistor.

(b) Remove the 2 bolts and disconnect the 2 ground wires.

(c) Remove the bolt and fuel pump resistor.