Installation

2GR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

NOTICE:
* Avoid physical shock to the accelerator pedal.
* Do not disassemble the accelerator pedal assembly.
1. INSTALL ACCELERATOR PEDAL





(a) Install the accelerator pedal with the 2 bolts.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the accelerator pedal position sensor connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.