Installation

2GR-FSE EMISSION CONTROL: PURGE VALVE: INSTALLATION

1. INSTALL PURGE VSV

(a) Install the purge VSV with the bolt.





Torque : 18 Nm (182 kgf-cm, 13 ft-lbf)

(b) Connect the 2 hoses.

(c) Connect the connector.

2. INSTALL V-BANK COVER Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.