Receiver Error - Tire Pressure Monitoring

TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error
C2176/76 - Receiver Error

DESCRIPTION

When the tire pressure warning ECU is detected to ECU internal error, DTC C2176/76 is stored.





INSPECTION PROCEDURE

NOTICE:
* When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
* It is necessary to perform the initialization Initialization after the registration Registration of the transmitter IDs into the tire pressure warning ECU if the ECU has been replaced.
PROCEDURE

1. CHECK DTC OUTPUT (C2176/76)

(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.

(b) Turn the engine switch off.

(c) Turn the engine switch on (IG) and check for DTC Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC C2176/76 is not output.

NG -- REPLACE TIRE PRESSURE WARNING ECU Replacement

OK -- END