Installation

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY

(a) Install the curtain shield airbag assembly with the 2 clips and 9 new bolts.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)





NOTICE:
Do not twist the curtain shield airbag assembly when installing it.

(b) Connect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL ROOF HEADLINING ASSEMBLY

Installation

HINT
Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY".

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION

5. INSPECT SRS WARNING LIGHT