Removal

U660E AUTOMATIC TRANSAXLE: DIFFERENTIAL OIL SEAL: REMOVAL

1. DRAIN AUTOMATIC TRANSAXLE FLUID Removal

2. REMOVE FRONT WHEELS

3. REMOVE FRONT AXLE HUB NUT LH Removal

4. REMOVE FRONT AXLE HUB NUT RH

HINT
Use the same procedure described for the LH side.

5. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH Removal

6. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

7. SEPARATE FRONT SPEED SENSOR LH Removal

8. SEPARATE FRONT SPEED SENSOR RH

HINT
Use the same procedure described for the LH side.

9. SEPARATE TIE ROD ASSEMBLY LH Removal

10. SEPARATE TIE ROD ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

11. SEPARATE FRONT SUSPENSION LOWER NO. 1 ARM LH Removal

12. SEPARATE FRONT SUSPENSION LOWER NO. 1 ARM RH

13. SEPARATE FRONT AXLE ASSEMBLY LH Removal

14. SEPARATE FRONT AXLE ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

15. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH Removal

16. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH Removal

17. SECURE FRONT AXLE HUB SUB-ASSEMBLY Removal

18. REMOVE TRANSAXLE CASE OIL SEAL

(a) Using SST, remove the oil seal from the transaxle case.





SST : 09308-00010

19. REMOVE FRONT TRANSAXLE CASE OIL SEAL

(a) Using SST, remove the oil seal from the transaxle housing.





SST : 09308-00010